[Introduction]
This "OBD Info-san!" is an additional meter of car for OBD-II is compatible.
If you want to use, Bluetooth ELM327 OBD-II adapter is required.

[Function]
Speed(km/h, mph), Tacho(rpm), Boost or Vacuum(kPa), Intake and Walter Temperature(C, F)
Battery Voltage, Atitude(meter, feet), Fuel(%), Fuel Consumption(km/l, mpg, l/100),
Distance(km, mile), Sensor(Rolling, Pitching, compass), etc...

[Trouble Diag]
Diagnosis of the vehicle corresponds to the OBD-II

[Data Logging]
Data that has been logging is playable on map player and uploaded to OneDrive.

[OBD interface protocol that supports]
01) STANDARD (Auto Negotiate)
02) SAE J1850 PWM (41.6kbaud)
03) SAE J1850 VPW (10.4kbaud)
04) ISO 9141-2 (5 baud init)
05) ISO 14230-4 KWP (5 baud init)
06) ISO 14230-4 KWP (fast init)
07) ISO 15765-4 CAN (11bit ID, 500kbaud)
08) ISO 15765-4 CAN (29bit ID, 500kbaud)
09) ISO 15765-4 CAN (11bit ID, 250kbaud)
10) ISO 15765-4 CAN (29bit ID, 250kbaud)
11) SAE J1939 CAN (29bit ID, 250kbaud)
12) ISO CAN 11bit ID P-ADDRESS 0
13) ISO CAN 11bit ID P-ADDRESS 2
14) ISO CAN 29bit ID P-ADDRESS 0
15) ISO CAN 29bit ID P-ADDRESS 2
16) TOYOTA CAN
17) TOYOTA K-LINE
18) DAIHATSU K-LINE
19) SUZUKI K-LINE 1
20) SUZUKI K-LINE 2

[Trial Version]
1) connect time, only 8 minutes.
2) diagnostic trouble diag, you can not use.
3) The AdMob is displayed on the main menu screen.